Ocean Stone Pty Ltd- tile shop -Alexandria Sydney NSW.

Posted onJuly 29, 2010

Ocean Stone Pty Ltd- tile shop -Alexandria  Sydney NSW.
Ocean Stone Pty Ltd is a specialized company dealing in various kinds of stone products, especially slate products. We import stone products directly from the selected quality quarries and manufacturers worldwide.
Natural stone has been valued throughout the millennia for its sculptural and architectural qualities.  They have the following performance:

Extremely durable and hard wearing
Slip resistant
Unaffected by the extremes of temperature
Highly resistant to acids, alkalis and other chemicals
Impermeable to water
Compatible to other building products.
Economical
Easily installed
Easily cleaned and maintained

Our range of products is including Slate wall stone panels, roofing slate, flooring, paving, walling, cladding, stone carvings and so on. A variety of sizes and many colors are available and different panels and corners for selection.
A broad range of internal and external applications.

Ocean stone Pty Ltd
684 Botany Road Alexandria,  Sydney NSW 2015
http://www.oceanstone.com.au
Ling J: 0449295166
0435266465
(02)80332325
ling@ocean-stone.com.au
Con P:  0409114451
sale@ocean-stone.com.au

Display Room:
Phone: (02)93174448
Fax   (02)93174349
Email: info@ocean-stone.com.au

UNIBOND ALL PURPOSE FLOOR TILE ADHESIVE AND GROUT-Technical Data Sheet.

Posted onMarch 17, 2010

UNIBOND ALL PURPOSE FLOOR TILE ADHESIVE AND GROUT-Technical Data Sheet.

Identification: UniBond All Purpose Floor Tile Adhesive, and Grout are grey cement based,
ceramic floor tile adhesive, and grout products. The product is supplied as
separate adhesive, and grout sachets in a cardboard outer.
Manufactured by Henkel Consumer Adhesives.
Uses/Applications: UniBond All Purpose Floor Tile Adhesive, and Grout is suitable for bonding, and
grouting ceramic floor tiles and mosaics in damp or wet service conditions. It is
also suitable for dry service conditions and is resistant to cracking in joints up to
3mm thick.
Limitations/Misuse: Not suitable for worktops. Do not allow grout to set on the tile face.
Description:
Composition: Grey cement, sand and other additives.
Physical Properties:
Appearance:
Adhesive Coarse grey powder.
Grout Slightly coarse grey powder.
Odours: None.
Performance:
Fire: Non flammable and non-combustible.
Water: The grout is suitable for general interior wall tiling including bathrooms, showers
and in permanently damp or wet areas.
Chemicals: Resistant to petrol, oils and weak alkalis, etc. Not resistant to acids.
Biological: Contains a preservative and does not support the growth of bacteria or fungi.
Thermal: Once cured it is unaffected by temperatures up to 120°C. Between 120°C &
400°C it will lose strength and will disintegrate above 400°C.
Durability/Reliability: Indefinite depending on conditions of use.
Compatibility with
other products: Compatible with most building surfaces.
Working Characteristics:
Rheology: Easy spread viscous paste (when water is added).
Working time: 2 – 3 hours.
Cure time: Normally 24 hours should be allowed for the tiling adhesive to dry before
grouting.
Ensure adhesive is dry before grouting. Grout hardens in 1 to 2 days, full cure in
14 days.
Cure Type: Hydraulic setting.
Temperature Range: Do not apply at temperatures below 5°C. Frost free conditions are required
during curing.
Coverage: Coverage will depend on application, but as a guide.

Standard – Up to 9 sq.ft Large – Up to 18.9 sq.ft.
Trade – Up to 38.7 sq.ft
Shelf Life: At least 1 year in unopened bag. Use as soon as possible after opening. Do not
store in damp conditions or in open bags.
Architect’s Specification Clause
The grout to be used shall be UniBond All Purpose Floor Tile Adhesive, and Grout. It shall be used and
applied strictly in accordance with the manufacturers instructions.
Health & Safety
The material is safe in normal use. However, with any material, good hygiene practices should be followed:
Avoid inhaling the dry powder. Avoid contact with the eyes, and if contact occurs, flush with copious
amounts of water for ten minutes. Avoid prolonged contact with the skin (may cause skin irritation). Keep
away from children and animals. People with sensitive skin should wear rubber gloves. This product
contains a fungicide. Follow pack instructions.
For full details see separate Henkel Health & Safety Data Sheet.
First Aid Procedure: See separate Henkel Health and Safety Data Sheet available on request.
Emergency Action: See separate Henkel Health and Safety Data Sheet available on request.
Supply
Prices and conditions of sales:
See separate Henkel Price List available on request.
Packaging
Packs contain adhesive, and grout in separate sachets
Standard Carry Box
Large Carry Box
Trade Carry Box
Grout sachet is also available separately
Handy Box
Advisory Service
For technical or practical advice on this or any other UniBond product, please contact our Technical Services
Department on Winsford (01606) 593933. Fax: (01606) 863762.
Guarantee
The information supplied in our literature or given by our employees, concerning the use of our products is
based upon extensive experience and given in good faith in order to help you. We also guarantee the
consistent high quality of our products; however, as we have no control over site conditions or the execution
of the work, we accept no liability for any loss or damage which may arise as a result thereof.

http://www.henkel-technical-services.co.uk
Technical Services
Henkel Consumer Adhesives
Road 5
Winsford Industrial Estate
Winsford Cheshire CW7 3QY
Telephone: 01606 593933
Fax: 01606 863762

UNIBOND ADVANCED ALL PURPOSE CERAMIC WALL TILE ADHESIVE & GROUT.

Posted onMarch 17, 2010

UNIBOND ADVANCED ALL PURPOSE CERAMIC WALL TILE ADHESIVE & GROUT.

dentification: A mould resistant ready mixed thin-bed adhesive for fixing ceramic wall tiles and mosaics
which is also used to grout the tile joints after fixing. Non-slip. Enables walls to be tiled
without the need of battens, fast setting (allowing tiling and grouting the same day) and a
good white colour. Water based, waterproof, non-flammable. Fixes tiles to plaster,
concrete, wood, paint, brick, plasterboard.
Manufactured by Henkel Consumer Adhesives.

Uses/Applications: UniBond All Purpose Ceramic Wall Tile Adhesive and Grout may be used for damp or wet
service conditions and will adhere to a wide variety of backgrounds. Used for tiling
showers and around baths and wash-basins. Additionally it may be used whenever a
conventional, non-waterproof, ready to use tile adhesive would be specified.
Limitations/Misuse: Not suitable for swimming pools. Should not be used as water barrier or near fireplace
openings. Internal use only. Not a flexible adhesive.
Compliance with Henkel Consumer Adhesives is certified by DQS (Certificate Registration
standards number : 003052 QM/UM) as a company operating a Quality Management System to BS
EN ISO 9001:2000, BS EN 14001 and OHSAS 18001.
Description:
Composition: A filled acrylic copolymer emulsion, with fungicide added
Colour: White.
Physical Properties:
Appearance: Smooth paste.
Odours: Slight odour whilst the adhesive dries.
Performance: Structural, Mechanical
UniBond Advanced All Purpose Wall Tile Adhesive and Grout conforms to the
requirements of BS EN 12004 Class D2E.
Fire: Non-flammable.
Water: When the adhesive has dried it is water resistant and will withstand water immersion.
Suitable for showers, splash-backs, etc.
Chemicals: Resistant to petrol, oils, weak alkalis, etc. Not resistant to acids or aromatic and ketone
solvents.
Biological: Contains a preservative and does not support the growth of bacterial of fungi.
Thermal: Suitable for service temperature up to 80°C.
Durability/Reliability: In dry or intermittently wet conditions – indefinite.
Compatibility with
other products: Compatible with most building surfaces.

Working Characteristics:
Rheology: Easy spread viscous paste.
Working time: Tiles may be placed up to 20 minutes after spreading the adhesive.
Cure time: Can grout as little as four hours after fixing tiles on a porous background. Allow 8 hours
when tiling onto non-porous surfaces. In normal conditions full bond strength and water
resistance is achieved within 14 days. Adhesive must be able to dry through. Showers,
etc, however, are normally usable two days after grouting.
Cure Type: Water evaporation.
Temperature Range: Do not apply at temperatures below 5°C. Frost free conditions are required during curing.
Coverage: 0.9 sq metres per litre if spread by notched trowel. Approximately 0.3 sq metres per litre
as 3 mm bed. (Coverages given are for fixing and grouting).
Shelf Life: At least 24 months in unopened containers. Protect from freezing.
Architect’s Specification Clause
The adhesive to be used shall be UniBond All Purpose Ceramic Wall Tile Adhesive and Grout. It shall be used and
applied strictly in accordance with the manufacturer’s instructions.
Health & Safety
This material is safe in normal use. However, with any material, good hygiene practices should be followed: Do not
take internal. Keep out of eyes. Keep away from children and animals. Wash off skin with soap and water before it
dries. People with sensitive skin should wear rubber gloves. This product contains a fungicide.
For full details see separate Henkel Health and Safety Data Sheet available on request.
First Aid Procedure: See separate Henkel Health and Safety Data Sheet available on request.
Emergency Action: See separate Henkel Health and Safety Data Sheet available on request.
Prices and conditions of sales: See separate Henkel Price List available on request.
Advisory Service
For technical or practical advice on this or any other UniBond product, please contact our Technical Services
Department on Winsford (01606) 593933. Fax: (01606) 863762.
Guarantee
The information supplied in our literature or given by our employees, concerning the use of our products is based
upon extensive experience and given in good faith in order to help you. We also guarantee the consistent high
quality of our products; however, as we have no control over site conditions or the execution of the work, we accept
no liability for any loss or damage which may arise as a result thereof.

http://www.henkel-technical-services.co.uk
Technical Services
Henkel Consumer Adhesives
Road 5
Winsford Industrial Estate
Winsford Cheshire CW7 3QY
Telephone: 01606 593933
Fax: 01606 863762