HANAFINN Ole-Repella is a high performance invisible and breathable sealer

Posted onMarch 17, 2010

HANAFINN Ole-Repella™

Currently only available in USA, MEXICO and CANADA

Ole-Repella™ is a high performance invisible and breathable sealer that protects natural stone, tiles, pavers, concrete and grout from stains to keep them looking good. HANAFINN Ole-Repella™ is a technological step forward from common penetrating sealers, providing a superior level of protection for a competitive price.

BENEFITS

  • Economical high performance sealer
  • Superior stain protection & longer lifespan
  • Invisible – so the look of the treated surface is maintained
  • Easy one-step application; makes cleaning easier
  • Breathable – allows water vapour to escape, helping to prevent damaging moisture buildup inside the treated material.
  • Suitable for indoor and outdoor use
  • Water based and ultra low VOC

 

Ole-Repella™ TECHNOLOGY

HANAFINN Ole-Repella™ is a technological step forward, providing a superior level of protection for a competitive price:

 

1) Deeper penetration = deeper barrier of protection

  • Ole-Repella’s sealing molecules are engineered to be much smaller for better penetration, even into dense materials such as granite.

 

2) Stronger bonding = longer lasting

  • Ole-Repella’s smaller molecules wedge themselves better into small nooks and crevices (better mechanical bonds).
  • The hydrophylic atoms which enable to molecule to adhere to the treated surface are better arrayed for superior adhesion.
  • These 2 factors give Ole-Repella™ a longer lifespan than common penetrating sealers.

 

3) Superior stain protection

  • Ole-Repella’s deeper protective barrier stops water travelling right up to the surface where it might cause visible damage.
  • Ole-Repella’s liquid repelling atoms are also arrayed for maximum repellence, providing superior stain protection.

.

TYPICAL APPLICATIONS

Ole-Repella™ is suitable to use indoors and outdoors for a wide variety of applociations, including floors, walls, building facades, swimming pool surrounds, patios, garages, countertops, kitchens and entertaining areas.

HOW TO USE

  1. TEST PRODUCT ON A SMALL AREA FIRST and allow a 24-hour cure time to determine the ease of application and desired results.
  2. Product is to be used without thinning
  3. Ensure surfaces to be treated are clean, dry and free of residues.
  4. Generously and evenly saturate the surface with Ole-Repella™ using a clean paint brush, micro-mesh cloth, roller or lamb’s wool applicator. A sprayer can be used for very absorbent (porous) surfaces. Avoid contact with surrounding areas. For very absorbent / porous surfaces, apply a second coat while the first coat is still wet.
  5. Allow the sealer to penetrate for 20-30 minutes, then thoroughly polish off any excess with clean, dry cloths/towels. The cloth can be moistened with Ole-Repella™ to ease polishing.
  6. Total application rate is approximately 1 quart per 20 to 100 sq.ft. or 1 litre per 2 to 10 square metres depending on surface absorption.
  7. Clean equipment with water.
  8. Ole-Repella™ WILL NOT PREVENT SURFACE ETCHING OR WEAR AND MAY LIGHTEN OR DARKEN SOME SURFACES.

.

PRECAUTIONS

  1. Do not take internally.
  2. Apply when surface temperature is between 5 – 35°C (40 – 95°F).
  3. Avoid mositure contact with the surface for six hours after application.
  4. Protect surrounding areas from over-spray.
  5. Keep away from drains, plants, water and soil.
  6. Wear suitable gloves, protective clothing, safety goggles and an mask during application.
  7. Avoid applying in windy conditions.
  8. Wash hands thoroughly after applying.

Dry-Treat Dealer. Accredited Applicator.
189 Marua Rd Ellerslie
Auckland Auckland New Zealand
Contact : Dino Gagas Phone 09 526 4581 , Fax 09 526 5909 , Mobile 021-930 066
Aucland
Website : http://www.lustre.co.nz
http://www.drytreat.com
Email : dino@lustre.co.nz

Alpha AWS-110 Electric Saw-Technical Data Sheet

Posted onFebruary 24, 2010

Alpha AWS-110 Electric Saw-Technical Data Sheet

lk

  • Water feed system included.
  • 4-1/2″, powerful 11 Amp motor. 20 mm Arbor.
  • Using the guide provided you can work on the edge of the stone.
  • Place a straight-edge on the stone and guide against it, or the AWS-110 can be used free hand like any other circular saw.
  • For safety in-line Ground fault interrupter is included.

Versatile Wet Stone Cutter for Tile Contractors

  • Ideal for those working with natural and engineered stone, tile, concrete, masonry and glass.
  • It was designed to produce straight and true cuts as required by professional fabricators and installers.
  • Equipped with one of the most powerful motors in its class, the AWS-110 has the strength to power through hard dense materials, such as, porcelain, hard red granites and engineered stone.
  • The water-feed supply eliminates the harmful dust particles common in dry cutting applications.
  • The included self-stick felt strips can be applied to the base plate to protect the work surface from scratches. The AWS-110 may be used several ways.
  • The reversible ruler guide down, one can work off the edge of the stone; in the up position, it can glide along a straight edge.
  • Of course, it may be used free hand and either wet or dry.
  • Additionally, utilizing the optional Carriage Assembly, one can use the Alpha® Guide Rail System to perform machine precision cuts.
  • You can easily transition to polishing with the Alpha® WS120 polisher and Ceramica pads.
  • The AWS-110 is more than a saw; it is a complete cutting system that can be used for cutting, scoring, profiling and more designed and manufactured with the highest quality standards, as are all Alpha Professional Tools® products.