DRY-TREAT 40N is an impregnating, invisible and breathable sealer

Posted onMarch 17, 2010

DRY-TREAT 40N


DRY-TREAT 40N is an impregnating, invisible and breathable sealer that protects porous tile, natural stone, paving and grout from damage caused by water and salts. Treated indoor and outdoor surfaces become easier to clean, maintain and keep looking good for longer. DRY-TREAT 40N provides lasting protection for engineering concrete, render, terracotta tile, cast stone, paving, limestone, brick and grout.

Typical applications: DRY-TREAT 40N is suitable for a wide variety of applications, including building facades, floors, walls, swimming pool surrounds, patios, garages, kitchens and public and private entertaining areas.

Benefits: DRY-TREAT 40N non film-forming; able to work without changing the appearance of the surface – keeps the original look; suitable for indoor and outdoor use; able to greatly reduce water uptake and minimise moss growth, freeze thaw spalling and efflorescence; an excellent chloride ion salt screen – ideal for marine and pool areas; highly water vapour permeable – able to breathe so there is no build-up of subsurface moisture, allowing it dry out; deeply penetrating – protecting against weathering and wearing; very alkali resistant – won’t breakdown in contact with cement based materials; and able to seal hairline cracks up to 0.3 mm (0.012 in.) and does not flake or peel, and able to stop rising damp.

Warranty: A 15-YEAR PERFORMANCE WARRANTY is offered when DRY-TREAT 40N is applied by an accredited applicator following our written instructions.

Application rate: Total application rate is approximately one litre per one to four sq. metres (10 to 40 sq. feet per quart) depending on absorption.

How to use:
1. ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24 hour cure time to determine the ease of application and desired results.
2. Ensure surfaces to be treated are dry, clean and free of residues.
3. Product is to be applied without thinning.
4. Generously saturate the surface with product using a low-pressure hand spray, a clean brush, or similar. Surface should have a mirror-like “wet” look for 3-5 seconds. Avoid contact with surrounding areas. 5. After 10 minutes, repeat Step 4. Total application rate is approximately one litre per one to four sq. metres (10 to 40 sq. feet per quart) depending on absorption.
6. Allow 10 minutes for product to penetrate surface then polish surface with a clean white dry cloth to remove excess product.
7. Clean equipment with organic solvent.
8. Sealer will not prevent surface etching or wear and may lighten or darken some surfaces.

Precautions: Do not take internally. Apply when surface temperature is between 5 – 35 ºC (40 – 95 ºF). Avoid moisture contact with the surface for six hours after application. Protect surrounding areas from over-spray. Keep away from drains, plants, water and soil. Use only in well-ventilated areas. Use a positive pressure respirator if ventilation is inadequate. Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application. Avoid applying in windy conditions. Wash hands thoroughly.

Active content: A mixture of 40 per cent active content in alcohol.

Pack size: 20 litre pails.

Dry-Treat Dealer. Accredited Applicator.
189 Marua Rd Ellerslie
Auckland Auckland New Zealand
Contact : Dino Gagas Phone 09 526 4581 , Fax 09 526 5909 , Mobile 021-930 066
Aucland
Website : http://www.lustre.co.nz
http://www.drytreat.com
Email :dino@lustre.co.nz

WATER-REPELLA is a penetrating, invisible and breathable sealer

Posted onMarch 17, 2010

WATER-REPELLA

WATER-REPELLA is a penetrating, invisible and breathable sealer that protects porous tile, natural stone, paving and grout from damage caused by water and salts. Treated indoor and outdoor surfaces become easier to clean, maintain and keep looking good for longer. WATER-REPELLA is an economical sealer for engineering concrete, terracotta tile, cast stone, paving, limestone, brick and grout.

TYPICAL APPLICATIONS
WATER-REPELLA is suitable for a wide variety of applications, including building facades, floors, walls, swimming pool surrounds, patios, garages, kitchens and public and private entertaining areas.

BENEFITS
WATER-REPELLA able to greatly reduce water uptake and minimise moss growth, freeze thaw spalling and efflorescence; non film-forming; able to work without changing the appearance of the surface – keeps the original look; suitable for indoor and outdoor use; able to breathe so there is no build-up of subsurface moisture, allowing it dry out, and very alkali resistant – won’t breakdown in contact with cement-based materials.

Application rates
Total application rate is approximately one litre per two to eight sq. metres (20 to 80 sq. feet per quart) depending on absorption.

How to use
1 ALWAYS TEST PRODUCT ON A SMALL AREA FIRST and allow a 24 hour cure time to determine the ease of application and desired results.
2 Ensure surfaces to be treated are dry, clean and free of residues.
3 Product is to be applied without thinning.
4 Generously saturate the surface with product using a low-pressure hand spray, a clean brush, or similar. Surface should have a mirror-like “wet” look for 3-5 seconds. Avoid contact with surrounding areas.
5 After 10 minutes, repeat Step 4. Total application rate is approximately one litre per two to eight sq. metres (20 to 80 sq. feet per quart) depending on absorption.
6 Allow 10 minutes for product to penetrate surface then polish surface with a clean white dry cloth to remove excess product.
7 Clean equipment with water.
8 Sealer will not prevent surface etching or wear and may lighten or darken some surfaces.

Precautions
Do not take internally. Apply when surface temperature is between 5 – 35 ºC (40 – 95 ºF). Avoid moisture contact with the surface for six hours after application. Protect surrounding areas from over-spray. Keep away from drains, plants, water and soil. Use only in well-ventilated areas. Use a positive pressure respirator if ventilation is inadequate. Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapour respirator during application. Avoid applying in windy conditions. Wash hands thoroughly.

Active content
Less than 10 per cent active content in water.

Pack size
5 & 20 litre (1.3 US gallon, 5.3 US gallon) plastic drums.

Storage
Use product within 12 months of purchase. Keep container tightly sealed, in a cool well-ventilated place. Product is freeze-thaw stable.

Dry-Treat Dealer. Accredited Applicator.
189 Marua Rd Ellerslie
Auckland Auckland New Zealand
Contact : Dino Gagas Phone 09 526 4581 , Fax 09 526 5909 , Mobile 021-930 066
Aucland
Website : http://www.lustre.co.nz
http://www.drytreat.com
Email :dino@lustre.co.nz

AQUA MIX BRILLIANCETM is a polishing cream and cleaner

Posted onFebruary 24, 2010

 AQUA MIX BRILLIANCETM is a polishing cream and cleaner.

DESCRIPTION:
AQUA MIX BRILLIANCETM is a polishing cream and cleaner that
nourishes and adds luster to polished stone countertops and
walls. Regular use helps protect factory polish.

t
USES:
SEALED polished natural stone (such as granite, limestone, marble,
and travertine) countertops, tabletops, and other non-traffic
polished surfaces. Effective for interior and exterior applications.
TEST A SMALL AREA:
According to application instructions to determine desired results.
APPLICATION:
1) Read entire label before using.
2) Apply a small quantity onto the stone surface.
3) Using a soft cotton towel or cloth, rub into stone surface until
no residue is visible.
4) Reapply as needed or desired.
LIMITATIONS:
• Do not allow product to come in contact with any nonrecommended
surface.
• Not recommended on floor surfaces.
• High alkaline, solvent-based, or disinfectant cleaners will
remove product.
HANDLING AND STORAGE:
• Close container after each use.
• Store in original container only.
• Store and use in temperatures between 50 ºF and 80 ºF (10 ºC
and 27 ºC).
• Unused, stored product is freeze-thaw stable.
CAUTION:
• KEEP OUT OF REACH OF CHILDREN.
• IF INGESTED: Drink 1 to 2 glasses of water.
• EYE CONTACT: Flush thoroughly with water.
• SKIN CONTACT: Wash with soap and water. If irritation persists,
seek medical attention.
• INHALATION: Remove to fresh air. Seek medical attention.
WARRANTY:
SATISFACTION GUARANTEED. If not completely satisfied with
this product’s performance, when used as directed, contact
Aqua Mix for exclusive remedy of either refund of purchase price
or replacement of product upon return of unused portion with
proof of purchase within one year of purchase. Determining
suitability of product for any intended purpose shall be solely
the responsibility of the user. THERE ARE NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY
OR FITNESS FOR PARTICULAR PURPOSE, WHICH EXTEND
BEYOND THE DESCRIPTION ON THIS LABEL. IN NO EVENT SHALL
AQUA MIX BE LIABLE TO THE CUSTOMER OR ANYONE ELSE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, HOWEVER
OCCASIONED. ALWAYS TEST FIRST.

source: http://www.aquamix.com