Nerang Tiles- tile shop -Nerang, QLD, Australia.

Posted onMarch 8, 2010

Nerang Tiles- tile shop -Nerang, QLD, Australia.

Nerang Tiles is a Supplier and direct Importer of Ceramic Tiles and related products in the Gold Coast Queensland Australia. Through our mother company Australasian Ceramic Imports Pty Ltd we source material from all over the world, bringing to Australia the best quality, current trends and exclusive ranges of ceramic tiles on offer from Europe and Asia.

  • floor and wall ceramic tiles
  • floor and wall porcelain tiles
    fully vitrified tiles
  • terracotta
  • marble
  • non-slip rated outdoor tiles
  • pool and glass mosaics
  • floor and wall features
  • adhesives and tiling tools
  • vanities and accessories
  • Interior design
  • Builders and specifiers boards and selections

Nerang Tiles

83 Lawrence Drive, Nerang, QLD 4211

p: (07) 5596 1916   f: (07) 5596 1949

SUPERFIXALL-Tile adhesive -Technical Data Sheet

Posted onJanuary 30, 2010

SUPERFIXALL-Technical Data Sheet.

Superfixall is an exceptionally high strength, high quality waterproof cement based adhesive
developed to bond all types of ceramic tiles. Ideal for bonding monocottura and fully vitrified
tiles, as well as natural stone, marble, granite and mosaic tiles onto brickwork, cement
render and concrete walls and floors. Suitable for both internal and external applications.
High strength bond
No odour
Water cleanable
Easy to spread
Thick and thin bed applications
All surfaces must be clean, dry, free from dust, grease, wax, oil, laitance curing compounds and all other
contaminants likely to prevent the adhesive bonding. Highly porous substrates must be primed with ASA
Multiprime prior to tiling. Concrete should be allowed to cure for at least 28 days and cement render 7 days prior
to tiling. A wood fl oat fi nish is preferred. Smooth steel trowel finished concrete must be mechanically abraided to
increase adhesion.
Movement joints must be incorporated in the tile layout in accordance with AS3958.1-1991 clauses to 6.
20kg of Superfixall powder requires approximately 5 litres of water which produces 14 litres of mixed product.
Add a measured amount of clean water into a clean container and sprinkle Superfixall powder slowly into the
liquid with constant stirring. Eliminate lumps. Mix to a thick toothpaste consistency. Allow to stand for 2 minutes
then remix. The adhesive is now ready to use.
Apply the mixed adhesive to the prepared substrate using the appropriate notched trowel for the size of the tile
being laid. A minimum of 1mm bed thickness for walls and 3mm for fl oors must be achieved. Ensure that the
bedded tiles are fully supported by the adhesive with no voids underneath or behind. Lay tiles into the adhesive
before it skins. The adhesive may also need to be applied to the back of the tiles to accommodate the required
levels. Do not disturb tiles untill the adhesive has dried. Commence grouting after 24 hours when tilework is firm.
Use the appropriate ASA grout, allowing joint widths of 1.5mm to 6mm for walls and 3mm to 12mm for fl oors as
per AS3958.1-1991 clause 5.4.6.
Superfixall can be removed from the surface of the tiles using a damp cloth while the adhesive is still wet. Tools
and equipment can be cleaned with warm water and detergent prior to adhesive drying.
Off White: 20kg paper bags and 5kg plastic bags. White: 20kg paper bags.
2.5 hours at 22°C and 50%RH Setting time: 24 hours at 22°C and 50%RH.
3kg powder per m² using a 6mm x 6mm notched trowel and 6kg powder per m² using a 12mm x 12mm notched


This product is non-toxic but contains cement. Use good occupational health and safety practices to avoid personal
contact. ASA recommend the use of dust masks, eye protection and wearing of gloves when handling this product.
For more detailed information refer to product MSDS.
Unopened bags can be stored for up to 12 months in a cool, dry and weatherproof environment. Bags must be
stored off the floor.
• Not suitable for tiling over flexible substrates, such as fi brous cement sheeting, plasterboard and timber.
• Must be mixed with undiluted ASA Megalastic for areas where vibration, shrinkage or tile growth may occur.
• Recommended for tiling

ABA Super Tile Set is a polymer fortified cement-based wall and floor tile adhesive.

Posted onJanuary 26, 2010

ABA Super Tile Set -polymer fortified cement-based wall and floor tile adhesive-Technical Datasheet.

Size (pack): 5kg and 20kg
Colour: Off White Powder
Coverage: 4kg of Super Tile set per square metre when using a 10mm notched trowel.
Super Tile set is a polymer fortified cement-based wall and floor tile adhesive. It is formulated for fixing all types of tiles, including dense bodied and fully vitrified tiles over sound substrates without the need for polymer additives. (AS 4992.1 classification).
Super Tileset meets the Green Building Council of Australia Green Star IEQ-13
requirements for Ceramic Tile Adhesives.

ABA Super Tile Set Technical Datasheet
ABA Super Tile Set MSDS

ARDEX Australia Pty Ltd
20 Powers Road, Seven Hills, NSW 2147
Ph: (02) 9851 9199
Fax:(02) 9674 5621.