CEG 2000™ 100% Solids Commercial Epoxy Grout-Technical Data Sheet

Posted onDecember 20, 2010

CEG 2000™ 100% Solids Commercial Epoxy Grout-Technical Data Sheet

* A 2 part blend of epoxies and aggregatestl
* No shrinkage
* High chemical stain resistance, impermeable and non-flammable
* Resistant to acids, alkalies and most solvents
* Easy installation and water cleanup
* Use to grout and set various tiles and pavers
* 8 standard colours
* Protected by MoldGard® Technology to resist mould and mildew growth
* Covered by a Lifetime Systems Warranty

Tile Types:
Can be used with virtually any type of tile including ceramic, porcelain, glass, mosaic, Saltillo, brick, pavers, natural stone and even green marble.

Pail Size: 1.02kg (Part A) & 11.40kg/7.6 Litres (Part B)

CEG 2000 Grout Colour Chart

Technical Data Sheet PDF

Data Sheet PDF

Material Safety Data Sheet Part A PDF

Material Safety Data Sheet Part B PDF

Global Tile Ltd
81 Mays Road, Onehunga
Auckland,1061, New Zealand
http://www.globaltile.co.nz
PO Box 12-504, Penrose
Auckland 1642, New Zealand

P: +64-9-6340712
F: +64-9-6342736

Biscem Wide Joint Grout-Cementitious wide joint tile grout-Technical Data Sheet.

Posted onMarch 17, 2010

Biscem Wide Joint Grout-Cementitious wide joint tile grout-Technical Data Sheet.

A specially prepared water resistant tile grout for internal and external ceramic wall and floor tile applications where tile joints are between 3mm and 15 mm.  Available in numerous colours, the range can be used to match or contrast with most glazed, handmade or natural and natural effect tiles.

Biscem Wide Joint Grout is water resistant, with a high degree of abrasion resistance and has a low porosity offering good resistance to dirt penetration.

Can be modified with Flexibond to produce a water resistant, flexible grout.

Quality and standards
Biscem Wide Joint Grout is manufactured under a BSI approved quality system to EN ISO 9002.

Features

* Easy to mix: mix easily with clean water to give a useable paste.
* Colours: good range of colours to suit most applications.
* Joint Width: formulated to be used in a joints up to 15 mm.
* Durable: can be used in both internal and external applications

Colours     Grey, Sandstone, Limestone, Brown, White, Anthracite and Ivory
Joint Width     3-15mm
Open Time     45 minutes
Coverage     This depends on the width and depth of the joints to be grouted and the size of the tiles
Shelf life     12 months when stored in a cool place unopened

Useful information

For use with tiles of low absorbency such as porcelain, quarries and some natural stones, e.g. slates, mix Flexibond with the mixing water at a ratio of 1:5.

Coverage depends on thickness and depth of tile joint, e.g. 150 x 150 mm tiles with joint width 10 mm and depth 8 mm requires nearly 2 kg per square metre.

Download the Wide Joint Grout Product Datasheet

Download the Wide Joint Grout Grout Colour Chart

http://www.biscem.co.uk
Biscem Products
Bostik Ltd
Common Road
Stafford
Staffordshire
ST16 3EH

Bisceminfo@Bostik.com

Biscem Vitri-Grout Floor- Cementitious single part flexible wide joint grout-Technical Data Sheet.

Posted onMarch 17, 2010

Biscem Vitri-Grout Floor- Cementitious single part flexible wide joint grout-Technical Data Sheet.

Biscem Vitri-Grout Floor is a specially prepared flexible, water and frost resistant polymer modified cement based material for grouting of joint widths between 3mm to 15mm.

When using porcelain or vitrified tiles Biscem Vitri-Grout should be used as this will enhance the bond strength at the tile/grout interface.
Biscem Vitri-Grout Floor can also be used for both interior and exterior situations, power shower areas, swimming pools, steam rooms, underfloor heating, wooden floors and areas where increased flexibility, water resistance and durability are required.

Quality and Standards

Vitri-grout Floor is manufactured under a quality system.

Features

* Easy to mix: mix easily with clean water to give a useable paste.
* Joint Width: formulated to be used with joints from 3-15mm.
* Durable: can be used in both internal and external applications and is ideal for mosaic applications such as kitchens, power showers and swimming pools

Joint Width     3-15mm
Open Time     45 minutes
Setting Time     24 hours
Coverage     depends on thickness and depth of tile joint, e.g. 150 x 150 mm tiles with joint width 3 mm and depth 5 mm requires nearly 0.5 kg per square metre
Shelf life     12 months when stored in cool place unopened

Download the Vitri-Grout Floor Product Datasheet

Download the Vitri-Grout Floor Grout Colour Chart

http://www.biscem.co.uk
Biscem Products
Bostik Ltd
Common Road
Stafford
Staffordshire

ST16 3EH
Bisceminfo@Bostik.com

Biscem Vitri-Grout Floor is a specially prepared flexible, water and frost resistant polymer modified cement based material for grouting of joint widths between 3mm to 15mm.

When using porcelain or vitrified tiles Biscem Vitri-Grout should be used as this will enhance the bond strength at the tile/grout interface.
Biscem Vitri-Grout Floor can also be used for both interior and exterior situations, power shower areas, swimming pools, steam rooms, underfloor heating, wooden floors and areas where increased flexibility, water resistance and durability are required.

Quality and Standards

Vitri-grout Floor is manufactured under a quality system.

Features

* Easy to mix: mix easily with clean water to give a useable paste.
* Joint Width: formulated to be used with joints from 3-15mm.
* Durable: can be used in both internal and external applications and is ideal for mosaic applications such as kitchens, power showers and swimming pools

Joint Width     3-15mm
Open Time     45 minutes
Setting Time     24 hours
Coverage     depends on thickness and depth of tile joint, e.g. 150 x 150 mm tiles with joint width 3 mm and depth 5 mm requires nearly 0.5 kg per square metre
Shelf life     12 months when stored in cool place unopened

Download the Vitri-Grout Floor Product Datasheet