Tile collection Infinity Stone -A large dimension for architecture by Ceramiche Gardenia Orchidea.

Posted onJuly 10, 2013

Tile collection Infinity Stone -A large dimension for architecture by Ceramiche Gardenia Orchidea.

The large 120×120 Infinity Stone slabs and its many smaller modules were designed at Garfloor’s research laboratories and are the outcome of a careful analysis of stone and how it has been used throughout the history of architecture.

  • A natural surface that is also an ideal solution out of doors.
  • The modularity of the collection creates perfect geometrical patterns.
  • The wide range of sizes was designed to cover all dimensions of floors and walls.
  • 8 modular textured shapes for architectural designs.
  • The luxury of the lapped surface lends itself to a plethora of uses.
  • Warm tones inspired by natural landscapes.
  • The modular design of the slabs and the pace of the mosaics enhance any interior design.
  • The large new 120×120 shape fits in with austere and important buildings.
  • The elegant geometry of the large floor listels enhances space and lends it remarkable depth.

Garfloor has always been the brand in Gardenia Group whose main focus is researching new ways for using porcelain stoneware materials with high technological content.

tile

Porfido naturale: Pav. 120×120, 30×120, 15×60, 30×30 Riv. 30×30
Collection: Infinity Stone

 

tile

Porfido naturale: 60×60, 30×30, 120×120, 30×120
Collection: Infinity Stone

 tile

Grigio lappato: Pav. 60×120 Bianco lappato: Riv. 30×120, 40×120, 60×120
Collection: Infinity Stone.

tile

Noce lappato: Pav. 120×120, 40×120 Beige lappato: Riv. 60×120, Mosaico Rettangoli 30×30
Collection: Infinity Stone.

tiles

Nero lappato: Pav. 60×60, 30×60, 30×30, 15 x60 Beige lappato: Riv. Mosaico Quadro 30×30
Collection: Infinity Stone

tiles

 Beige lappato: 30×120, Mosaico Lineare 30×30
Collection: Infinity Stone

 

http://www.garfloor.it

Gruppo “Ceramiche Gardenia Orchidea S.p.A.”
Via Canaletto, 27 – I-41042 Spezzano di Fiorano, MO (Italy)
Tel. +39 0536.849611 – Fax. +39 0536.849856 – VAT No. IT 01018240364
E-mail: info@garfloor.it

Biscem Speed-e-Poxy-Two part epoxide tile adhesive and grout-Technical Data Sheet.

Posted onMarch 17, 2010

Biscem Speed-e-Poxy-Two part epoxide tile adhesive and grout-Technical Data Sheet.

Biscem Speed-e-Poxy is an easy to use grouting and adhesive. It is suitable for bedding and grouting all types of cladding, mosaic, ceramic, fully vitrified tiles, quarry tiles and stone slabs in areas such as power showers, kitchen worktops, battery rooms, swimming pools, dairies, hospitals etc.
It is particularly suited where conventional cement based materials do not satisfy the requirements of hygiene, mechanical strength or resistance to chemical, thermal or corrosive attack. The formulation is such that joint widths up to 10mm can be filled without excessive sagging on horizontal and vertical surfaces.
Quality and standards
Biscem Speed-e-Poxy is distributed under a BSI approved quality system to EN ISO 9002.

Features

* 2 part: Speed-e-Poxy is a two part system and the complete contents of the two pots must be completely mixed together.
* Colours: good range of colours to suit most applications.
* Durable: cured epoxide grout joints are impermeable to water and other liquids, hygienic and resistant to most chemicals and abrasive forces.

Colours     Grey, Black, White, Ivory & Brown
Packaging     available in 1 kg and 5 kg containers.

Try our new Grout and Tile Sampler.
Useful information
Coverage depends on thickness and depth of tile joint, e.g. 150 x 150 mm tiles with joint width 5 mm and depth 3 mm requires nearly 0.3 kg per square metre.
Speed-e-Poxy sets after approximately 30 minutes, and can be lightly trafficked after.
Speed-e-Poxy sets hard and is very difficult to remove if allowed to set on the tiles.  Excess material should be removed before curing by wiping with a good sponge (not foam).

Download the Speed-e-poxy Product Datasheet

Download the Speed-e-poxy grout colour chart

http://www.biscem.co.uk
Biscem Products
Bostik Ltd
Common Road
Stafford
Staffordshire
Bisceminfo@Bostik.com

ST16 3EHBiscem Speed-e-Poxy is an easy to use grouting and adhesive. It is suitable for bedding and grouting all types of cladding, mosaic, ceramic, fully vitrified tiles, quarry tiles and stone slabs in areas such as power showers, kitchen worktops, battery rooms, swimming pools, dairies, hospitals etc.
It is particularly suited where conventional cement based materials do not satisfy the requirements of hygiene, mechanical strength or resistance to chemical, thermal or corrosive attack. The formulation is such that joint widths up to 10mm can be filled without excessive sagging on horizontal and vertical surfaces.
Quality and standards
Biscem Speed-e-Poxy is distributed under a BSI approved quality system to EN ISO 9002.

Features

* 2 part: Speed-e-Poxy is a two part system and the complete contents of the two pots must be completely mixed together.
* Colours: good range of colours to suit most applications.
* Durable: cured epoxide grout joints are impermeable to water and other liquids, hygienic and resistant to most chemicals and abrasive forces.

Colours     Grey, Black, White, Ivory & Brown
Packaging     available in 1 kg and 5 kg containers.

Try our new Grout and Tile Sampler.
Useful information
Coverage depends on thickness and depth of tile joint, e.g. 150 x 150 mm tiles with joint width 5 mm and depth 3 mm requires nearly 0.3 kg per square metre.
Speed-e-Poxy sets after approximately 30 minutes, and can be lightly trafficked after.
Speed-e-Poxy sets hard and is very difficult to remove if allowed to set on the tiles.  Excess material should be removed before curing by wiping with a good sponge (not foam).

Download the Speed-e-poxy Product Datasheet

Luminescent Stone Slabs will bring style and impact to any room

Posted onFebruary 3, 2010

Luminescent Stone Slabs will bring style and impact to any room.

Showcasing naturally-occurring patterns and striking colours, ShellShock Designs luminescent stone slabs will bring style and impact to any room.  For a real attention grabber or feature piece these slabs can be fabricated into many forms for many different functions.

Cut straight from the rock face and then polished until they achieve a beautiful and dramatic glow, these spectacular semi-precious stone slabs are perfect for counter tops and as decorative wall panels.

Available in Onyx, Agate, Jade, Crystal and Marble

Slab size: 600 x 1200 mm, 1200 x 2400 mm

Thicknesses available: 16mm, 18mm (special order 20mm,30mm)

re re ree ss

dss ff nb wer

fdg dss ew ew

WORLDWIDE DISTRIBUTORS…

Worldwide HQ
Contact: Jonathan
Email: jonathan@shellshockdesigns.com
Phone: +44 (0)871 662 7316

France
Contact: Jonathan
Email:  jonathan@shellshockdesigns.com
Phone: +44 (0)871 662 7316

India – Delhi
Contact: Paveen Sharma
Email:  psharma07@gmail.com
Phone: +91 9810 301 477

Saudi Arabia
Contact: Waqar Ahmed Khan
Email: al.abid.est@gmail.com
Phone: +92 (0)2 6487 067

Dubai, UAE, Iran
Contact: Saleem Khan
Email:quartz.design.international@gmail.com
Phone: +971 503 039 580

USA
Contact: Jonathan

Email: jonathan@shellshockdesigns.com
Phone: +44 (0)871 662 7316

Australia
Contact: Jonathan
Email:jonathan@shellshockdesigns.com
Phone: +44 (0)871 662 7316

South Africa
Contact: Jonathan
Email:  jonathan@shellshockdesigns.com
Phone:   +44 (0)871 662 7316
If your country is not listed above, don’t worry – remember we have customers all over the world – Jonathan is the Worldwide Distributor – contact him on. jonathan@shellshockdesigns.com  or phone on +44(0)871 662 7316.