Caboolture Tiles Pty Ltd – Tile Shop – Caboolture, Queensland, Australia

Posted onJune 14, 2011

Caboolture Tiles Pty Ltd – Tile Shop – Caboolture, Queensland, Australia

Caboolture Tiles is a 100% owned and operated family business engaged in supplying tiles, tile adhesives and tiling tools to the building and tiling industries in Brisbane’s northern suburbs, west to Kilcoy, Esk and districts, north to Sunshine Coast areas.

Caboolture Tiles, the ceramic tile specialists has one of the largest range of tiles on display in the shire and its right at our Beerburrum Rd store. Caboolture Tiles prides itself on its display range & colour specialising. We have a full range of tiling products such as tile glues and grouts, tiling tools, fitted tile accessories such as tile soap holders, tile soap shelves, tile towel rail holders and tile paper holders.

Caboolture Tiles also stock a large range of glass mosaic tiles for the hobby lover.

We will give you a level of service, support and total commitment that go beyond your expectations of a tile retail store

As previous bathroom renovators Caboolture Tiles offer full advice on all your tiling problems.


70 – 72 Beerburrum ROAD
Queensland 4510
Phone       07 5495 5588

OMNIGRIP® Maximum Strength Adhesive -Technical Data Sheet

Posted onDecember 16, 2010

OMNIGRIP Maximum Strength tile Adhesive -Technical Data Sheet

* 25% less weight than traditional adhesivestile adhesive
* Premixed – easy to spread and carry
* High polymer formula – remains flexible
* 33% less shrinkage than traditional tile adhesives
* Maximum coverage – superior bond
* Sets wall and floor tile up to 40 cm x 40 cm
* Extended open time
* Resists sagging and slipping
* Provides higher bond strengths
* Extended open time
* Contributes to LEED Certification
* Protected by MoldGard® Technology to resist mold and mildew growth
* Covered by an Installation Systems Warranty

Tile Types:
Ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile. For tile up 40cm x 40cm

Refer technical data sheet below

Refer technical data sheet below

Pail Size: 3.78 Litres and 13.26 Litres

Colour: White

Technical Data Sheet PDF

Data Sheet PDF

Material Safety Data Sheet PDF

Global Tile Ltd
81 Mays Road, Onehunga
Auckland,1061, New Zealand
PO Box 12-504, Penrose
Auckland 1642, New Zealand

P: +64-9-6340712
F: +64-9-6342736

Classifications of Tile Adhesives.

Posted onMarch 17, 2010

Classifications of Tile Adhesives.

Choosing a tile adhesive can be difficult for the newbie. Always ask your supplier for advice and be sure to read the label of any adhesive you are planning to use. It never helps, however, to do some background research so that you understand the information being given to you and feel prepared to ask the appropriate questions.

Here is some information about how ceramic, stone and vinyl tile adhesives are categorized and labeled to help you make the right choice.
Classifications of Tile Adhesives

Tile adhesives fall into three categories: Type C (Cementitious); Type D (Dispersion) and Type R (Reaction Resin). Here are some of the b
(Type C) Cement-based Adhesives

Cement-based adhesives come in the form of dry powders that are mixed with water. Once set, they are usually unaffected by water so are often a good option for use in wet environments. If you want to color your adhesive (for example if you are not using grout) then you can buy a powder colorant for use BEFORE you add water to the adhesive. You can also buy liquid colorants for use after you’ve hydrated the adhesive. Some cementitious adhesives can be mixed with additives to give them extra properties like more strength or greater flexibility, etc.
(Type D) Combined Adhesive and Grout

For the experienced, using an adhesive/grout combination is rarely advisable except for the smallest and simplest of jobs. Inevitably you need to make compromises if you choose this option, as what is desirable from a grout is not necessarily a wanted property in an adhesive – and vice versa. It does have the advantage of being incredibly easy to use however; so consider it if this is your first tiling adventure and the job isn’t too ambitious.
(Type D) Acrylic or PVA-based Adhesives

These are premixed adhesives. They are by far the most common adhesives for wall tiling, as it’s easy to use, and also to clean up should there be any spillages. They set by drying naturally through water loss. Avoid using this kind of adhesive anywhere where there will be a lot of moisture or unusual heat.

You can also buy water-resistant (which is not to say “water-proof”) varieties of PVA-based adhesives for non-commercial use in bathrooms
and showers.
(Type R) 2-Part Resin Adhesives

These come in two parts, to be mixed by the tiler on site. One part is the resin while the other is a hardener. If you did not already know this, then you should probably not pursue this option, as two-part-resin adhesives are usually difficult to use and expensive to buy. Even for experienced tilers, this is an option typically reserved for particularly difficult situations or very specific needs.
Vinyl Tile Adhesive

If you are using vinyl tiles then the previous information may be of limited use for you. The tiles are likely to be self-adhesive, in which case you should not need to use anything extra. If they are not, and of course you should check before you buy, then purchase some vinyl tile adhesive (specifically for floors, if this is what you are using them for). It sets fairly quickly and is of course very sticky, so if you mess up a tile, be ready to whip it back up quickly!
Other Tile Adhesive Classifications

In addition to the types laid out above, extra characteristics are also described by these numbers and letters:

1: normal adhesive
2: improved adhesive
F: fast-setting
T: adhesive with reduced slip
E: extended open time (cementitious adhesives and improved dispersion adhesives only).

For example, and adhesive labelled D2F would be a fast-setting dispersion adhesive with improved adhesive properties. Memorizing these will certainly make it seem that you mean business when you speak with your supplier.

In case you were wondering, “open time” is the maximum space of time after an adhesive is applied, at which tiles can be embedded in the adhesive and still meet the stated bond strength requirements.

This information should help you clarify what you are looking for before you choose an adhesive. Without the right adhesive, your tiling project is doomed to failure so, while choosing the tiles
may be more interesting and fun, the adhesive choice is, if anything, even more crucial.